Calibrating Foot Pod; Calibrating Power Pod - Suunto SPARTAN SPORT 1.8 User Manual

Table of Contents

3.19.1 Calibrating foot POD

If you have paired a foot POD, your watch automatically calibrates

the POD using GPS.

For the first calibration, you should select a sport mode where the

foot POD is used and the GPS accuracy is set to Best. Start the

recording and run at a steady pace on a level surface, if possible, for

at least 15 minutes.

Run at your normal average pace for the initial calibration, and

then stop the exercise recording. The next time you use the foot

POD, the calibration is ready.

Your watch automatically re-calibrates the foot POD as needed

whenever GPS speed is available.

For power PODs (power meters), you need to initiate the calibration

from the sport mode options in your watch.

To calibrate a power POD:

1. Pair a power POD with your watch if you have not done so

already.

2. Select a sport mode that uses a power POD and then open the

mode options.

3. Select Calibrate power POD and follow the instructions in the

watch.

Once calibrated, you can check the last calibrated date from the

options whenever you use the sport mode. You should re-calibrate

the power POD from time to time.

Table of Contents