Shooting, Viewing, And Erasing - Olympus FE-48 Instruction Manual

Shooting, Viewing, and Erasing

Shooting with the optimum
aperture value and shutter
speed [PROGRAM AUTO]
In this mode, automatic shooting settings are
activated while also allowing changes to a wide
range of other shooting menu functions, such
as exposure compensation, white balance, etc.
as needed.
1
Press the n button to turn on
the camera.
If the [PROGRAM AUTO] indicator is not
displayed, press the m button to display
the function menu and then set the shooting
mode to P. "Using the Menu" (p. 4)
Press the n button again to turn off
the camera.
14 EN
[PROGRAM AUTO] indicator
4 4
Number of storable still pictures (p. 48)
Monitor
(standby mode screen)
Current shooting mode display
PROGRAM AUTO PROGRAM AUTO
4 4
2
Hold the camera and compose the
shot.
P P
0.0 0.0
When holding the camera, take care not to
WB WB
AUTO AUTO
cover the fl ash with your fi ngers, etc.
ISO ISO
AUTO AUTO
14
M
3
Press the shutter button halfway
down to focus on the subject.
●
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
●
The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
P P
0.0 0.0 Press halfway
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
14
M
"Focusing" (p. 44)
AUTO
Monitor
1/400 F3.5
Horizontal grip
Vertical grip
AF target mark
1/400 1/400 F3.5 F3.5
Shutter speed Aperture value
P P