Advertisement
SET‑UP
Unpacking and setting up the vehicle
2.1
Packaging 2
–
Remove the box and the plastic packaging.
Info
To avoid damaging the motorcycle during the setup, leave the protective
film on the vehicle until you have finished.
–
Remove the separate enclosure and unpack it. Check that the scope of delivery
is complete on the basis of the enclosed packing list.
–
Have a lift stand available.
600809-10
Lift stand (54829055000)
–
Carefully loosen and remove the tensioning belt over the link fork.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tensioning belts around the lower triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off of the palette.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
Package 12
–
Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling over.
To avoid damaging the motorcycle during the setup, leave the protective
film on the vehicle until you have finished.
–
Remove the separate enclosure and unpack it. Check that the scope of delivery
is complete on the basis of the enclosed packing list.
600811-10
–
Have a lift stand available.
Lift stand (54829055000)
–
Together with an assistant, take the vehicle off of the palette.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
600812-10
–
Install the shock absorber. (
600813-10
p. 8)
3
Advertisement
