Timer Function; Canceling The Timer; Power Sound Function; Sleep Timer - Samsung MM-B3 Instruction Manual

Timer Function

B
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time,
you must start again.
1
Switch the system on by pressing On/Standby ( ).
2
Press Timer/Clock until TIMER is displayed.
3 Press Program/Set.
Result:ON TIME is displayed for a few seconds, followed by any switch-
on time already set; you can set the timer switch-on time.
4
Set the timer switch-on time.
a Set the hour by pressing Tuning and .
b Press Program/Set.
Result: The minutes flash.
c Set the minutes by pressing Tuning and .
d Press Program/Set.
Result: OFF TIME is displayed for a few seconds, followed by any
switch-off time already set; you can now set the timer switch-off
time.
5
Set the timer switch-off time.
a Set the hour by pressing Tuning and .
b Press Program/Set.
Result: The minutes flash.
c Set the minutes by pressing Tuning and .
d Press Program/Set.
Result: VOL 10 is displayed, where 10 corresponds to the volume already set.
6
Press Tuning and to adjust the volume level and press
Program/Set.
Result:The source to be selected is displayed.
7
Press Tuning and to select the source to be played when the
system switches on.
If you select... You must also...
TAPE (cassette) Insert a recorded cassette in the deck.
TUNER (radio) a Select the FM or AM frequency band by pressing
Tuning and .
b Press Program/Set.
c Select a preset station by pressing
Tuning and .
CD (compact disc) Load compact disc.
Press Program/Set to confirm the timer.
8
Press On/Standby to set the system to standby mode.
Result: is displayed to the middle right of the time, indicating that the timer has
been set. The system will switch on and off automatically at the required
times.
If the timer switch on and off times are identical, the word ERROR
is displayed.
16
On/Standby Timer Timer/
On/Off Clock
2
1,8
Power Program
EQ Preset Sound /Set AUX
3,4,5,6,7
Sleep CD Repeat Mono/ST. TUNER
Band
TAPE
CD
VOL.
4,5,6,7
Tuning
Mode
CD CD CD
CD
4,5,6,7
VOL.
Cancelling the Timer
After having set the timer, it will start automatically as shown by
the indication on the display. If you no longer wish to use the
timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To... Press Timer On/Off
Cancel the timer Once.
Result: is no longer displayed.
Restart the timer Twice.
Result: is displayed again.
On/Standby
Timer Timer/
On/Off Clock
Power Program
EQ Preset Sound /Set
AUX
Sleep CD Repeat Mono/ST. TUNER

Power sound function

This machine is equipped with the function of POWER SOUND,
which amplifies bass treble output to twice as much for powerful
real surround-sound.
1
Press the Power Sound button on the front panel.
Result: P.SOUND is displayed for a few seconds.
A more powerful resonant sound is diffused.
2
To cancel this function, press Power Sound again.
Result: OFF is displayed for a few seconds.
EQ S.Bass
TUNER CD TAPE
AUX
Band
Power
Sound
Down Tuning Mode Up
Counter
REC/Pause CD Sync.
Mute Reset
Repeat
A B

Sleep Timer

You can set the system to switch off automatically.
Example: You wish to fall a sleep to music.
1 Press Sleep on the remote control.
Result: The following indications are displayed:
2
Press Sleep one or more times to indicate how long the system should
continue playing before it switches off:
90 MIN 60 MIN 45 MIN
OFF 15 MIN 30 MIN
At any time, you can:
Check the remaining time by pressing Sleep
Change the remaining time by repeating Steps 1 and 2
3
To cancel the sleep timer function, press Sleep one or more times until
OFF is displayed and the word SLEEP disappears.
Power Program
EQ Preset Sound /Set AUX
Sleep CD Repeat Mono/ST. TUNER
1,2,3
Band
TAPE
CD
S.Bass

(Super Bass) Function

Your Micro Component system has a bass amplification function
called S.Bass.
This function makes the sound more powerful and real.
1
Press the S. Bass button on the front panel.
Result: S. BASS is displayed.
2
To cancel this function, press S. Bass button again.
Volume
EQ S.Bass
TUNER CD TAPE
AUX
Band
Power
Sound
Down Tuning Mode Up
Counter
REC/Pause CD Sync. Mute
Reset
Repeat
A B

Selecting an Equalizer Preset

Your micro-component system is equipped with a preset equal-
izer that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to.
Press EQ on the front panel or EQ Preset on the remote control until the
required option is selected.
Press the button repeatedly to select
© ROCK © CLASSIC ©PASS "
" POP
Volume
EQ S.Bass
TUNER CD TAPE
AUX
Band
Power
Sound
Down Tuning Mode Up
Counter
REC/Pause CD Sync. Mute Reset
Repeat
A B
GB
17