Setting The Clock; Listening To A Compact Disc; Selecting A Track; Searching For A Specific Music Passage On A Cd - Samsung MM-B3 Instruction Manual

Setting the Clock

B
Your system is equipped with a clock which allows you to
turn your system on and off automatically.
You should set the clock:
When you first purchase the micro-component system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby ( ) .
2
Press Timer/Clock twice.
Result: CLOCK is displayed.
3
Press Program/Set.
Result: The hour flashes.
4
To... Press...
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press Program/Set.
Result: The minutes flash.
6
To... Press...
Increase the minutes
Decrease the minutes
7
When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
On/Standby Timer Timer/
On/Off Clock
VOL.
2
1
Tuning
Power Program
Mode
EQ Preset Sound /Set AUX
CD
CD
4,6
3,5,7
VOL.
Sleep CD Repeat Mono/ST. TUNER
Band

Listening to a Compact Disc

Do not use CDs of irregular shapes like heart or octagon shapes.
The performance of the player may be degraded.
1
Press the CD( )button on the main unit and select CD.
2
Open the CD door by pushing on the top of the main unit marked
Push Open ( ).
Result: The CD door is opened.
3
Place the CD on the compartment so that the CD label faces upward.
4
Close the CD door.
Result: Number of tracks and the total playback time are shown on
the display.
5
Press the CD( ) button for playback.
6
Adjust the volume according to needs with the following procedures.
Press the VOL. + or – button.
10
7 If it is desired to pause while the playback is processing, press the
CD( ) button.
Press the CD( ) button once again to play back again.
8
To stop playback, press the Stop ( ) button.
TUNER CD TAPE
AUX
Band
1, 5, 7
Down Tuning Mode Up
REC/Pause CD Sync.
8

Selecting a Track

You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
To start playback at the beginning of the...
Next track
Current track
Previous track
Track of your choice
VOL.
CD
CD
4,6
Tuning
Mode
CD
CD CD CD
VOL.
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly search for a
specific music passage on a track.
To search through the tracks... Press and hold down...
Forwards
Backwards
It is recommended that you turn the volume down before using
this function.
VOL.
Tuning
Mode
CD CD CD CD
VOL.

CD Repeat Function

You can repeat:
A specific track on a compact disc
All tracks on the compact disc
1
Press the CD Repeat button.
To repeat the...
Current track indefinitely
6
Volume
Disc
2
6 When you wish to stop the Repeat function, press CD Repeat a third time.
Result:REP is no longer displayed and the function is cancelled.
EQ S.Bass
Power
Sound
Counter
Mute Reset
Repeat
A B
Press...
once
Repeat A
once
twice
or the
appropriate number of When you select CD(TAPE) Repeat A
times.
passages to which you were listening are repeated 3 times.
1
Press CD(
Result:The CD(TAPE) player starts playing.
2
Press Repeat A
Result:The indications appear: START
The flashes appear: A
A Time is memorized.
3
Press Repeat A
Result:The indications appear: END
B Time is memorized.
Your selected passages are repeated 3 times.
4
When you have finished the Repeat playback,
Press Repeat A
for at least one second
TUNER
for at least one second
Band
1
Down Tuning Mode

Programming the Order of Playback

You can decide for yourself:
1
If necessary, stop the player by pressing Stop ( ).
Press CD Repeat...
2
Press Program/Set.
Once (REP. 1 is displayed)
Result:P -- 01 -- -- is displayed.
Twice (REP. ALL is displayed)
3
Select the required track by pressing the SKIP buttons:
4
Press Program/Set.
Result:P -- 02 -- -- is displayed.
5
To select other tracks, repeat Steps 3 and 4.
Sleep CD Repeat Mono/ST. TUNER
6
When you have finished selecting the tracks, press CD (
Band
listening to the selection, in the order in which the tracks were
TAPE
programmed.
7
Press Stop ( ) twice to cancel the selection when the disc is playing.
CD

B Function

B playback, the music
) or TAPE button.
B button.
B
B button.
B.

Regarding the playback of CD-R/RW

EQ S.Bass
CD TAPE
AUX
In the case of an original CD-R(Recordable) recorded in
Power
Sound
1 audio CD format, CD-RW(Rewritable) and editing by the
Up
Counter
REC/Pause CD Sync.
Mute Reset
user, playback is processed on the respective
completed status. (The player may not be played back
Repeat
A B
according to the characteristics of the CD or recorded
status.)
2,3,4
The CD-RW is comparably less reflexive than CD which
causes more time delay to read.
The order in which you listen to the tracks
The tracks to which you do not wish to listen
This feature can be combined with the CD Repeat function.
PROGRAM
to move backwards through the tracks
to move forwards through the tracks
PROGRAM
You can programme up to 24 tracks.
) to start
Power Program
EQ Preset Sound /Set AUX
2,4
Sleep CD Repeat Mono/ST. TUNER
Band
TAPE
CD
6
1,7
VOL.
Tuning
Mode 3
CD CD CD
3 CD
VOL.
11
GB