Checking Or Changing Programmed Tracks; Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung MM-B3 Instruction Manual

Checking and Changing Programmed
Tracks
B
You can check and change your selection of tracks at any time.
You must have selected at least one track.
1
Press Stop ( ) once if you have started listening to the selection.
2
Press Program/Set.
Each time you press Program/Set, the next selection is displayed.
3
Press Program/Set one or more times until the track to be changed is
displayed.
4
Press or to select the new track.
5
Press Program/Set.
6
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
You can change one or more tracks in your initial selection.
On/Standby
Timer Timer/
On/Off Clock
Power Program
EQ Preset Sound /Set AUX
2,3,5
Sleep CD Repeat Mono/ST. TUNER
Band
TAPE
CD
1
6
VOL.
Tuning
Mode
4 CD CD CD CD 4
VOL.
12
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
8 MW station(OPTION)
15 AM stations(option)
7 LW station(OPTION)
5 MW station(OPTION)
15 AM stations(option)
5 SW1 station(OPTION)
5 SW2 station(OPTION)
1
Switch the system on by pressing On/Standby ( ).
2
Select the TUNER function by pressing TUNER/Band on the front panel.
3
Select the required frequency band by pressing TUNER/Band again.
Result:The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
LW(Option) Long Wave
SW1,SW2(Option) Short Wave
4
Press Tuning Mode one or more times until MANUAL is displayed.
Automatic tuning
Press and hold or on the remote control.
Press and hold , on the main unit.
Result: Automatically scans and tunes to the next available station.
Manual tuning
Press or on the remote control.
Press or on the main unit.
Result: Press the button repeatedly to tune in the desired station
manually.
PRESET function is explained in detail in the section "Selecting a
Stored Station" on.
5
Select the station to be stored by pressing , to increase or
decrease the frequency respectively.
To scroll through the frequencies faster when searching manually,
hold down the , .
The automatic search procedure may stop on a frequency that does
not correspond to a radio station.
If this happens, use the manual search mode.
1
Volume
EQ S.Bass
TUNER CD TAPE
2,3
AUX
Band
Power
Sound
Down Tuning Mode Up
Counter
REC/Pause CD Sync.
Mute Reset
Repeat
A B
4,5 4,5
4
Searching for and Storing the Radio
Stations(continued)
6
If you do not want to store the radio station found, revert to Step 4 and
search for another station.
Otherwise:
a Press Program/Set.
Result: The program number is displayed for a few seconds.
b Press Tuning and to assign a program number between 1
and 15.
c Press Program/Set to store the radio station.
Result: The program number is no longer displayed and the station is
stored.
7
To store any other radio frequencies required, repeat Steps 3 to 6.
The PROGRAM function can be used to assign a new station to
an existing program number.
Power Program
EQ Preset Sound /Set AUX
6
Sleep CD Repeat Mono/ST. TUNER
Band
TAPE
CD
VOL.
Tuning
Mode
CD CD CD CD
6
6
VOL.
Volume
EQ S.Bass
TUNER CD TAPE
AUX
Band
Power
Sound
Down Tuning Mode Up
Counter
REC/Pause CD Sync.
Mute Reset
Repeat
6 A B
6

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing On/Standby ( ).
2
Select the TUNER function by pressing TUNER/Band on the front panel.
3
Select the required frequency band by pressing TUNER/Band.
4
Select the radio station as follows.
To listen to ... Press ...
A stored station a Press the Tuning Mode button
until "PRESET" is displayed.
b Tuning and to select the
required station.
Press Tuning Mode again to exit the stored station selection
function.
On/Standby Timer Timer/
On/Off Clock
1
Power Program
EQ Preset Sound /Set AUX
2,3
Sleep CD Repeat Mono/ST. TUNER
B d
VOL.
Tuning
Tuning
Mode
Mode
4
CD
CD CD CD
4
4
VOL.

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials
before fixing them permanently
If reception from a specific FM radio station is poor, press
Mono/ST to switch from stereo mode to mono. The quality of the
sound will be improved.
Power Program
EQ Preset Sound /Set AUX
Sleep CD Repeat Mono/ST. TUNER
Band
TAPE
GB
13