Connecting Your System To The Power Supply; Connecting The Speakers; Connecting To An External Source; Display Function - Samsung MX-D630 User Manual

Connecting your System to the Power Supply

☛
Before plugging your system into a main socket, you must check the
voltage.
1
Plug the main lead into an appropriate socket.
2
Press the POWER ( ) button to switch your mini-compact system.

Connecting the Speakers

the speakers connector terminals are located on the rear of the system.
Left speaker (marked L)
◆
Right speaker (marked R)
◆
1
To achieve the correct sound quality, insert those speaker connector cables to
the speaker connector terminals of the system.
Speaker (R)

Connecting to an External Source

connecting an External analog component
Example: Analog signal components such as a VCR, Camcorder, and TV.
auX : Rear Panel
1
Connect
component.
• Be sure to match connector colors.
2
Press the auX button to select the AUX input.
You can select AUX by pressing the FuNctiON button on the remote
control.

DISPLAY function

You can view all functions available on the display, adjust the brightness
of the display.
Each time you press the DisPlaY button on the remote control, the display
mode will change as following:
the Demo function
◆
All functions available on the system appear on the front panel display.
the Dimmer function
◆
The Dimmer function is selected and the display darkens.
Display ON
◆
Speaker (L)
The Display turns on.
clock ON
◆
The Clock you set is displayed.
Audio Cable
If the external analog
component has only
one Audio Out, connect
either left or right.
(not supplied)
auX iN on the player to Audio Out on the external analog
POWER POWER
FUNCTION
FUNCTION
CD REC CD REC
DISPLAY DISPLAY USB REC DISC SKIP USB REC DISC SKIP
SPEED SPEED
TIMER TIMER TIMER/CLOCK TIMER/CLOCK SLEEP SLEEP
ON/OFF ON/OFF
REPEAT REPEAT REPEAT REPEAT
A-B A-B
MUTE MIC VOL
MUTE MIC VOL
+10
+10
RDS PTY DELETE
RDS PTY DELETE
MP3-CD/CD
MP3-CD/CD
SOUND
SOUND
TUNING /ALBUM
TUNING /ALBUM
ENG
CD CD
+ +
-
-
RDS DISPLAY
RDS DISPLAY
EQ
EQ
7