Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung MM-VB7 Instruction Manual

Searching for and Storing the Radio
Stations
GB
You can store up to:
15 FM stations
15 AM(MW) stations
1
Switch the system on by pressing Standby/On (
2
Select the required frequency band by pressing TUNER (Band)
again on the front panel.
Result: The appropriate indication is displayed:
FM
AM(MW)
3
Press Tuning Mode one or more times until MANUAL is displayed.
Automatic tuning
Press and hold
Press and hold
Result: Automatically scans and tunes to the next available station.
Manual tuning
Press or on the remote control.
Press or
Result: Press the button repeatedly to tune in the desired station
manually.
PRESET function is explained in detail in the section "Selecting a
Stored Station" on.
4
Select the station to be stored by pressing
or , (remote control) buttons to increase or decrease the
frequency respectively.
To scroll through the frequencies faster when searching
manually, hold down the
(remote control) buttons.
The automatic search procedure may stop on a frequency
that does not correspond to a radio station.
If this happens, use the manual search mode.
5
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Program/Set.
Result: The PROGRAM is displayed for a few seconds.
b Press , (remote control) or
a program number between 1 and 15.
c Press Program/Set to store the radio station.
Result: PROGRAM is no longer displayed and the station is
stored.
6
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station
to an existing program number.
2
1
4
18
Frequency Modulation
Medium Wave
, on the remote control.
, on the main unit.
on the main unit.
,
(main unit)
, (main unit) or
, (main unit) to assign
4 5
3
4
5
3 4 5
5
2

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing Standby/On (
2
Select the required frequency band by pressing TUNER(Band) .
) .
3
Select the radio station as follows.
To listen to ...
Stored station
,

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
5
Press ...
1. the Tuning Mode button until "PRESET"
is displayed.
2. , (remote control) or
(main unit) to select the required
program.
2
1
3
) .
,
3