Setting The Speaker - Samsung AV-R700 Instruction Manual

Digital surround av receiver system
Hide thumbs Also See for AV-R700:
Table of Contents

Advertisement

AS700GB
11/24/04 10:53 AM

Setting the Speaker

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.Signal outputs
and frequency response from the speaker will automatically be adjusted according to your speaker configuration
and whether certain speakers are used or not.
17
Page 17
REMOTE CONTROL
1
Press SPK SEL. button to select the speaker you want.
Each time you press this button, F.SPK
SW SPK
2
Press ...† button to set the speaker as you want.
3
Repeat the steps 1 and 2 to set the speaker.
To Exit Setup Mode
Wait for about 5 seconds or press the SPK SEL. button of the remote control to
select SPK MODE OFF.
To Use SUBWOOFER button of Remote Control
Press SUBWOOFER button.
Each time you press this button, SW SPK : YES, SW SPK : NO will be selected in turn.
If you play in 2 Channel Stereo, select 'YES' to use Subwoofer and 'NO' not to use.
Caution!
If F.SPK is set to 'SMALL', SW SPK is fixed to 'YES'.
If S.SPK is set to 'NONE', SB SPK is fixed to 'NONE'.
You cannot use Speaker Setup Mode in 5.1CH MULTI CH function.
C.SPK
CROVR
SPK MODE OFF will be selected in turn.
S.SPK
SB SPK

Advertisement

Table of Contents
loading

Table of Contents