Audio; Simple Setup; Speaker Setting - Samsung HW-E6500 User Manual

Av receiver system
Table of Contents

Advertisement

Available languages

Available languages

Simple Setup

It is the Function for selecting the Speaker Layout suitable with the layout type of the connected
Speaker. That is two path to select:
1. Settings AudioSimple Setup
2. Settings SystemInitial Setting  Simple
Speaker Setup
• Normal Mode: Use this option when the surround speakers are located behind you.
If Normal Mode is selected, you can only use Dolby Pro Logic II .
• Simple Mode: Use this option if the surround speakers are located in front of you.
If Simple Mode is selected, Speaker Setting cann't be set.
If Simple Mode is selected, you can only use Virtual Surround.

Speaker Setting

Speaker Size
You can set the Speaker Size of the Center and Surround
Speakers, as well as Test Tone in this mode.
• For the Front, the mode is set to Small.
• For the Subwoofer, the mode is set to Present.
• For the Center and Surround, you can switch the mode to
Small or None.
- Small : Select this when using the speakers.
- None : Select this when no speaker is connected.
NOTE
The speaker mode may vary depending on the
Dolby Pro Logic and Stereo settings.
Sound Edit
You can adjust the balance and level for each speaker.
Press the ▲▼ buttons to select and adjust the desired
speaker.
Press the ◄► buttons to adjust the settings.
Adjusting Front/Surround Bal.
You can select between 0 and -6.
The volume decreases as you move closer to –6.
Adjusting Center/Surround/Subwoofer Level
The volume level can be adjusted in steps from +6dB to –6dB.
The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals for Surround speakers.
You can also set the Test Tone in this mode.

Audio

Settings
Settings
Front Bal.
Surround Bal.
Center Level
Surround Level
SW Level
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone
: Off
" Select ' Return
mMove " Select ' Return
Sound Edit
dB
L
R
dB
dB
L
R
dB
dB
dB
dB
<Change " Select ' Return
mMove " Select ' Return
25
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents