TRENDnet User's Guide
• Operation Mode: Displays the current operating mode for each wireless band
• Wireless Mode: Displays the wireless mode set on each wireless band
• Channel Width: Displays the applied channel width
• Frequency (Channel): Displays the current operating wireless channel
• Tx/Rx Packets: Displays the Transmit (Tx) and Receive (Rx) packet rate
• SSID List: Displays the multiple SSID settings.
Check connected wireless clients
Dashboard > 2.4GHz Wireless / 5GHz Wireless
1. Log into your management page (see
2. Click on the Status tab and click 2.4GHz or 5GHz Wireless.
Device Name: Displays the name of the client that is connected to the selected
•
band
•
MAC Address: Displays the MAC address of the client that is connected to the
access point
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access the management
page" on page 16).
SSID: Displays the SSID that the client is connected to
•
•
Mode: Displays the 802.11 wireless mode and the channel width that the client
device is connected.
•
Download (Bytes): Displays the amount of data transmitted to the client
Upload (Bytes): Displays the amount of data received from the client
•
•
Action: Clicking the Black List button will ban the client from the network
System Log
Dashboard > System Log
System log keeps track of changes made to the access point.
1. Log into your management page (see
2. Click on the Dashboard tab and click System Log.
•
Refresh: Clicking Refresh allows the access point to update the log with any
new data that has not been previously logged yet.
•
Clear: Clears all the data saved previously onto the log.
Indoor Wireless Access Points
"Access the management
page" on page 13).
35