Wireless Bandwidth Control; Enable Snmp - TRENDnet TEW-823DAP V2 User Manual

TRENDnet User's Guide
• WiFi Security: Displays the wireless security type of the wireless network
• No VLAN Tag: Select this option to use no VLAN Tag
• Specified VLAN ID: Select this option and enter the assigned VLAN ID.
4. Click Apply then click the Save button on the top-right when finished.

Wireless Bandwidth Control

Wireless (2.4GHz or 5GHz) > Wireless Bandwidth Control
1. Log into your management page (see
2. Click on the Wireless (2.4GHz or 5GHz) tab and click Wireless Bandwidth Control.
3. Review the settings for both wireless bands (2.4GHz and 5GHz) and click Save to save
settings.
• Status: Select Enable to enable bandwidth control on this SSID
• SSID: The SSID that the following limits will apply to
• Download MAX: Enter your network's inbound traffic limit for the selected wireless
SSID
• Upload Limit: Enter your network's outbound traffic limit for the selected wireless
SSID
4. Click Apply then click the Save button on the top-right when finished.
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access the management page" on page 13).

Enable SNMP

Management > SNMP Settings
SNMP (Simple Network Management Protocol) is a network management protocol used
to monitor (read) and/or manage (write) multiple network devices on a network. This
preconfigured external SNMP server.
1. Log into your management page (see
2. Click on the Management tab and click SNMP Settings.
3. Review the settings and click Save to save settings.
Indoor Wireless Access Points
"Access the management page" on page 13).
25