Verify And Configure The New Disks - Dell EMC Data Domain DD9800 Installation Manual
Installation and storage expansion guide
Hide thumbs
Also See for EMC Data Domain DD9800:
- Hardware overview and installation manual (92 pages)
Table of Contents
Advertisement
3. Screw the attaching screws to the NEMA channel.
Verify and configure the new disks
About this task
Complete the following tasks to verify and configure the new disks.
Steps
1. Run the filesys enable to command to reenable the file system.
2. Run the enclosure show summary command to verify the Data Domain system recognizes the new disk shelf.
NOTE:
This step is not required when adding a new disk pack to an existing DS60.
● For a new DS60:
# enclosure show summary
Enclosure Model No. Serial No.
--------- --------- --------------- ------ -------- --------- --------
1
DD####
2
DS60
3
DS60
--------- --------- --------------- ------ -------- --------- --------
3 enclosures present.
● For a new ES30:
# enclosure show summary
Enclosure Model No. Serial No.
--------- --------- --------------- ------ -------- --------- --------
1
DD####
2
ES30
3
ES30
--------- --------- --------------- ------ -------- --------- --------
3 enclosures present.
3. Run the enclosure show topology command to verify there are two valid SAS paths to the new storage.
NOTE:
This step is not required when adding a new disk pack to an existing DS60.
NOTE:
Optionally run the enclosure test topology command to test each SAS path.
4. Run the disk show state command to verify the system can see all the disks in the new enclosure. All the new disks
should display in the Unknown state.
● For a new disk pack in an existing DS60:
# disk show state
Enclosure
Row(disk-id)
--------------
1
2
E(49-60)
D(37-48)
C(25-36)
B(13-24)
A( 1-12)
--------------
Legend
State
------
-------------------
.
In Use Disks
s
Spare Disks
U
Unknown Disks
96
Add Storage Capacity
<Serial#>
Online
<Serial#>
Online
<Serial#>
Online
<Serial#>
Online
<Serial#>
Online
<Serial#>
Online
Disk
1
2
3
4
5
6
----------------------------------------------
.
.
.
.
|--------|--------|--------|--------|
| Pack 1 | Pack 2 | Pack 3 | Pack 4 |
|.
.
s |U
U
U |-
|.
.
. |U
U
U |-
|.
.
. |U
U
U |-
|.
.
. |U
U
U |-
|.
.
. |U
U
U |-
|--------|--------|--------|--------|
----------------------------------------------
Count
-----
18
1
15
State
OEM Name OEM Value Capacity
State
OEM Name OEM Value Capacity
7
8
9
10 11 12 13 14 15
-
- |-
-
- |
-
- |-
-
- |
-
- |-
-
- |
-
- |-
-
- |
-
- |-
-
- |
4 Slots
60 Slots
60 Slots
4 Slots
15 Slots
15 Slots
Advertisement
Table of Contents
