Toshiba BA420T Series Owner's Manual page 19

2. PRINTER SETUP
2.3 Loading the Media
(Cont.)
NOTE:
Be sure to close the Strip
Module completely. Failure to
do this may cause a paper
(2) Press down the Release Bar to open the Strip Module.
Strip Module
(3) Remove enough labels from the leading edge of the media to leave
300mm of backing paper free.
(4) Pass the backing paper through the opening under the Backing Paper
Feed Roller. Then, close the Strip Module until it clicks.
Backing Paper
Backing Paper Feed Roller
(5) Insert the leading edge of the backing paper into the slot of the Front
Cover.
(6) Close the Front Cover and the Top Cover.
Slot
E2- 9
Release Bar
Front Cover
ENGLISH VERSION
2.3 Loading the Media
Click
Top Cover