Table of Contents
Advertisement
No
Name
A
O
%Error
B
l
ZERO
C
3 Seconds
A
OPEN/CLOSE
D
Q
C
E
F
K
G
P
EXIT CONFIG
H
G
H
I
I
J
J
K
information@ITM.com
Turns the power on or off.
Toggles voltage, mA, or Loop Power and % Error measurement functions in the upper display.
Selects the pressure measurement function in the upper display. Repeated pushes cycle through the
different pressure units. Zeros pressure when held for 3 seconds.
Activates the switch test.
Turns backlight on or off.
Selects frequency sourcing or measurement.
Selects pulse sourcing or measurement.
Recalls a source value from memory corresponding to 100 % of span and sets it as the source value.
Press and hold to store the source value as the 100 % value.
Exits Configuration Menu.
Increments output by 25 % of span.
Decrements output by 25 % of span.
Recalls from memory a source value corresponding to 0 % of span and sets it as the source value.
Press and hold to store the source value as the 0 % value.
Press and hold when powering up to identify the firmware version. The firmware version is shown in the
upper display for about 1 second after initialization.
Fluke-Direct
Table 4. Key Functions
Description
Multifunction Process Calibrator
Getting Acquainted with the Calibrator
.ca
1.800.561.8187
11
Advertisement
Table of Contents
