Advertisement
Accessories (Order Separately)
Calculating Unit
Appearance
SmartMonitor Sensor Setup Tool for
Personal Computer Connection
Appearance
+
CD-ROM
CD-ROM
*1. When using the ZX-LDA11/41 with the SmartMonitor, either the ZX-
SFW11EV3 or the ZX-SW11EV3 SmartMonitor must be used. Earlier ver-
sions cannot be used.
*2. The ZX-SFW11EV3 SmartMonitor can be used only to set functions and
monitor waveforms.
Specifications
■ Sensor Heads (Reflective)
Item
Model
Optical system
Diffuse reflective
Light source (wave length)
Visible-light semiconductor laser with a wavelength of 650 nm and an output of 1 mW max.
EN class 2, FDA class II
Measurement point
40 mm
±10 mm
Measurement range
Beam shape
Spot
Beam size*1
50-µm dia.
2 µm
Resolution*2
±0.2% FS
Linearity*3
(entire range)
±0.03% FS/°C (Except for ZX-LD300 and ZX-LD300L, which are ±0.1% FS/°C.)
Temperature characteristic*4
Ambient illumination
Incandescent lamp: 3,000 l× max. (on light receiving side)
Operating: 0 to 50°C, Storage: −15 to 60°C (with no icing or condensation)
Ambient temperature
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min
Vibration resistance
10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
(destruction)
Shock resistance
300 m/s
(destruction)
Degree of protection
IEC60529, IP50
Connection method
Connector relay (standard cable length: 500 mm)
Weight (packed state)
Approx. 150 g
Materials
Case: PBT (polybutylene terephthalate), Cover: Alu-
minum, Lens: Glass
Accessories
Instruction sheet, Laser warning label (English)
*1. Beam size: The beam size is defined by 1/e
outside the defined spot and the material around the sensing object is more reflective than the sensing object.
*2. Resolution: The resolution is the deviation (±3σ) in the linear output when connected to the ZX-LDA Amplifier Unit. (The resolution is measured with the standard reference object
(white ceramic), at the measurement point with the ZX-LDA set for an average count of 4,096 per period.) The resolution is given at the repeat accuracy for a stationary workpiece,
and is not an indication of the distance accuracy. The resolution may be adversely affected under strong electromagnetic fields.
*3. Linearity: The linearity is given as the error in an ideal straight line displacement output when measuring the standard reference object. The linearity and measurement values
vary with the object being measured.
*4. Temperature characteristic: The temperature characteristic is measured at the measurement point with the Sensor and reference object (OMRON's standard reference object)
secured with an aluminum jig.
Note:
Highly reflective objects can result in incorrect detection by causing out-of-range measurements.
ZX Series (ZX-L)
2
Model
ZX-CAL2
Name
Model
ZX-series Communi-
ZX-SF11
cations Interface
Unit
ZX-series Communi-
ZX-SFW11EV3
cations Interface
*1*2
Unit + ZX-series
Sensor Setup Soft-
ware Basic
ZX-series Sensor
ZX-SW11EV3
Setup Software
*2
ZX-LD40
ZX-LD100
ZX-LD300
100 mm
300 mm
±40 mm
±200 mm
100-µm dia.
300-µm dia.
16 µm
300 µm
±0.2% FS
±2% FS
(80 to 120 mm)
(200 to 400 mm)
2
3 times each in six directions (up/down, left/right, forward/backward)
2
(13.5%) of the strength of the beam at the beam center (measured value). Incorrect detection may occur if there is light leakage
Smart Sensors
Side-view Attachments
Appearance
Cables with Connectors on Both Ends (for
*1
Extension)
Cable length
1 m
ZX-XC1A
4 m
ZX-XC4A
8 m
ZX-XC8A
9 m*1
ZX-XC9A
*1. Robot Cable models are also available. The model numbers are
ZX-XC@R.
*2. For use only with Reflective Sensors.
ZX-LD30V
ZX-LD40L
Regular reflec-
Diffuse reflective
tive
30 mm
40 mm
100 mm
±2 mm
±10 mm
±40 mm
Line
75 µm x 2 mm
150 µm x 2 mm 450 µm x 2 mm 100 µm x 1.8 mm
75-µm dia.
0.25 µm
2 µm
16 µm
±0.2% FS
±0.2% FS
±0.2% FS
(entire range)
(32 to 48 mm)
(80 to 120 mm)
IEC60529, IP40 IEC60529, IP50
Approx. 250 g
Approx. 150 g
Case and cover:
Case: PBT (polybutylene terephthalate), Cover: Alu-
Aluminum,
minum, Lens: Glass
Lens: Glass
Applicable
Sensor Head
ZX-LT1001/
ZX-XF12
LT005
ZX-LT010
ZX-XF22
Model
Quantity
1
ZX-LD100L
ZX-LD300L
Regular reflective
300 mm
30 mm
±200 mm
±2 mm
300 µm
0.25 µm
±2% FS
±0.2% FS
(200 to 400 mm)
(entire range)
IEC60529, IP40
Approx. 250 g
Case and cover:
Aluminum, Lens:
Glass
Model
Z3X-LD30VL
Advertisement
