Brother 882-W73 Operation Manual page 45

c
Remove the presser foot. (page 45)
d
Use the disc-shaped screwdriver to turn the needle
clamp screw toward you (counterclockwise) to loosen
the screw. Remove the needle.
e
With the flat side of the needle facing the back, insert
the new needle all the way to the top of the needle
stopper (viewing window) in the needle clamp. Use the
disc-shaped screwdriver to securely tighten the needle
clamp screw.
a
1 Needle stopper
2 Hole for inserting the needle
3 Flat side of the needle
CAUTION
• Be sure to push in the needle until it touches
the stopper, and securely tighten the needle
clamp screw with the disc-shaped screwdriver.
If the needle is not completely inserted or the
needle clamp screw is loose, the needle may
break and cause injury.
f
Attach the presser foot. (page 45)
g
Touch to unlock all keys and buttons.
Memo
• The automatic threading function can be used with
home sewing machine needle sizes 75/11 through
100/16.
• When threads such as transparent nylon
monofilament or specialty threads are used, it is
not recommended to use the needle threader.
c
CHANGING THE NEEDLE
1
43