Specifications - Emerson Rosemount CX1100 Reference Manual

General information
May 2023
1.5

Specifications

Table 1-1: System Measurement Specifications
Specification
Net O
Repeatability
Lowest detectable limit
Process temperature effect
System speed of response to calibration gas
Environmental specifications
Table 1-2: Probe
Specification
Probe
Maximum process temperature
Table 1-3: Probe Terminations
Specification
Rosemount CX1100 probe ambient temperature
limits
Table 1-4: Remote Display
Specification
Materials
Ambient temperature limits
Installation specifications
Table 1-5: Probe
Specification
Probe mounting range
Reference air
8
range
2
Description
0 - 23%
0.1% of O or 1.0% of reading, whichever is lower
2
0.05% O
2
Less than 0.3% O from 77 to 1292 °F (25 to 700
2
°C)
Initial response in less than 3 seconds, T90 in
10 seconds. Response to process gas changes
will vary depending on process gas velocity and
particulate loading of the diffuser.
Description
Process wetted materials are 304 stainless steel.
752 °F (400 °C)
Description
-4 to 158 °F (-20 to 70 °C)
Description
Polycarbonate
-4 to 122 °F (-20 to 50 °C)
Description
Vertical or horizontal: 2-in. 150# (4.75 in. (121
mm) bolt circle) and DIN145
Note
Flanges are flat-faced and for mounting only.
Flanges are not pressure-rated. A 2.5-in.
diameter hole in the process is required.
Many adapter flanges are available to mate to
existing flanges.
No instrument air required. Ambient air diffuses
into the probe passively. Ensure that ambient air
is fresh (20.95% O ).
2
Reference Manual
00809-0100-4110
Rosemount CX1100