LG LFXS28566 Series Technical Manual page 181

Product Category
Anti Crease
Dryer
Dryer Compressor Error
Dryer Child Lock
Dryer Cool Down
Dryer Electric Heater Error
Dryer Electric Leakage Error
Dryer Inlet Error
Dryer Outlet Error
Dryer Belt Error
Dryer Door Error
Door Error – 4
Dryer
Dryer Thermistor Error
Dryer Thermistor Error – 1
Dryer Thermistor Error – 2
Dryer Thermistor Error – 3
Dryer Thermistor Error – 4
Humidity Sensor
Dryer
Dryer Power interruption
Dryer Duct work blocked
FLOW SENSE INDICATOR show
four bards during drying cycle
or display shows "d80" after
Dryer drying
Dryer Water supply pump
Dryer EE PROM error
NFC module
Dryer
Dryer modum
Dryer Wi‐Fi module
Dryer Gas Dryer
Failure Code Explanation
The Ant error is a notification that the program is finished and the
Anti Crease option was selected. Note; as soon as you remove the
Ant clothes and switch off the appliance
CE1 The CE1 error indicates a problem related to the compressor
The CL error is a notification that the appliance is locked for
CL program changes by the customer. Note: when CL is displayed
The Cd error is a notification that the program is finished. Explain
Cd that when Cd is displayed
The EHE error indicates a problem with the heater using too much
EHE current. Note; this can result in a shutdown of the appliance by a
The ELE error indicates a problem with the appliance using too
ELE much current. Note; this can result in a shutdown of the appliance
The IE error indicates a problem with the water supply. Note: the
IE water is used for the steam generator.
The OE error indicates a problem with draining the water. Note:
the water level should be below a preset level after 12 minutes. If
OE not the appliance will stop to prevent further damages.
The bE error indicates a problem with the drum drive. Note; the
appliance has a detection mechanism to prevent the laundry from
bE overheating when the drum is no longer rotating. If the belt breaks
The dE error indicates a problem with the door lock system not
dE closing the power circuit loop.
dE4 The dE4 error indicates a problem with the door switch.
The tE error indicates a problem related to the heating system.
tE The appliance has stopped to prevent further damages.
tE1 The tE1 error indicates a problem related to the heating system
tE2 The tE2 error indicates a problem related to the heating system
tE3 The tE3 error indicates a problem related to the heating system
tE4 The tE4 error indicates a problem related to the heating system
HS Humidity sensor failure
Electric dryer power cord is not connected correctly; or house
power supply is incorrect. House fuse is blown; circuit breaker has
PS / PF/ nP tripped; or power outage has occurred.
d75 / d80 / d90 / Duct work is about 75%, 80%, 90% to 95% blocked. Displays for
d95 two hours only
issue with duct Ductor too long or too many turns/restrictions; significant
work and/or blockage of ductwork due to lint buildup or debris; appliance
venting detect a restriction in the external dryer venting
E5 (steam dryer) pump valve is less than 10 in test mode
EE operation is abnormal
nC NFC module open or shorted
nE modum is abnormal
nF Wifi is abnormal
9A5 No heat; gas to unit turned off
Remarks
The EHE error indicates a problem with the heater using too much current. Note; this
can result in a shutdown of the appliance by a tripped main fuse.
a faulty thermistor: a faulty heater: a faulty ELB (Electric Leakage Break) sensor: the
motor taking too much current: a faulty Main PCB
a full water tank: a kinked or clogged drain hose: a faulty control valve: a faulty drain
pump: a faulty drain pump sensor: a faulty Main PCB
an open door after program start: a not completely closed door: a faulty door lock: a
faulty Main PCB
a faulty door switch: a faulty Main PCB
: a faulty thermostat: a faulty thermistor: a faulty heater: a faulty Main PCB
DO NOT use the dryer until the exhaust system has been cleaned and/or repaired.
displays only in test mode
displays only in test mode
displays only in test mode