No.
Part name
8
Fan case
(lower), Fan
case (upper)
Procedure
1. Detachment
1) For the back air intake, perform the procedure
in 1 of "1Suction panel."
2) Remove the screw on the rear of the fan case
(lower).
(One Ø4×10 screw for each fan case)
3) Disengage the hanging hooks on both sides of
the fan case (lower) to remove the fan case
(lower).
4) Remove the screws used to attach the fan
case (upper).
(Two Ø4×10 left and right screws for each fan
case)
5) Move the hooking plate of the fan case
(upper), which is hooked to the blower base,
downward to remove the fan case (upper).
2. Attachment
1) Use the hooking plate to hook the fan case
(upper) to the blower base to attach the fan
case (upper).
NOTE)
Make sure the fan case (upper) does not move
even if you pull on it.
2) Use the screws that you removed in step 1-4)
of "8Fan case (lower/upper)" to attach the fan
case (upper).
3) Insert the tip of the fan case (lower) into the
blower base and use the hooking plate to
attach the fan case.
4) Use the screws that you removed in step 1-2)
of "8Fan case (lower/upper)" to attach the fan
case (upper).
– 91 –
Remarks
Fan case (upper)
Fan case
(lower) screw
Hanging hook
Fan case (lower)
Fan case
(upper) screw
Hanging part
Blower base