Troubleshooting - IKEA TILLREDA Manual

ENGLISH

Troubleshooting

Problem
The appliance does not
operate.
Appliance stops operating.
Error indication:
Appliance stops operating.
Error indication:
Appliance stops operating.
Error indication:
Appliance stops operating.
Error indication:
Appliance stops operating.
Error indication:
Appliance stops operating.
Error indication:
Appliance stops operating.
Error indication:
Error code shows when the hob is powered on and error is detected, E and numbers are displayed
intermittently (1 second) and circulation.
If there is a fault, try to resolve it by following
the troubleshooting guidelines. If the problem
cannot be resolved, contact your nearest
IKEA store.
Possible Cause
Power shortage or power short circuit
in the power source of your home.
Power connection to socket not
performed properly.
More than 10 seconds have passed
since the appliance was switched on.
Child lock is switched on.
Several sensor fields were touched
at the same time.
The cookware is not suitable for
induction.
No cookware on cooking zone or
cookware diameter is less than 120mm.
The cookware is empty (dry-boiling)
or cooking temperature is too high.
The air inlet and outlet is being
blocked.
Surrounding temperature is too high.
The main power supply is over AC 150V.
The main power supply is lower than
AC 80V.
The temperature sensor of the
appliance is not working.
The cookware is empty (dry-boiling)
or cooking temperature is too high.
Internal exception
Solution
Overlook the power supply to
hob for correct connection.
Switch the appliance on again.
Deactivate Child lock. (See the
section "Child safety device").
Only touch one sensor field.
Change to a cookware
suitable for induction.
Place cookware on the
cooking zone.
Turn off the appliance and
restart after 5 minutes. If
E2 persists, please contact
nearest IKEA store.
Change to product suitable
power supply.
Change to product suitable
power supply.
Please contact nearest IKEA
store.
Let appliance cool down and
prevent dry-boiling.
Turn off the appliance and
restart after 5 minutes. If
E0 persists, please contact
nearest IKEA store.
If you operated the appliance wrongly,
dealer may not take place free of charge,
even during the warranty period.
32