Care And Cleaning; Troubleshooting - IKEA VILSTA Manual

ENGLISH
continue to run after the appliance is
turned off if the detected temperature of
the cooktop is still too hot after turning it
off.
• Rhythmic sounds, similar to the ticking
sound of a clock: this noise occurs only
when at least three cooking zones are

Care and cleaning

General information
Warning! Switch off the appliance
and let it cool down before you
clean it.
Warning! For safety reasons, do
not clean the appliance with
steam blasters or high-pressure
cleaners.
Warning! Sharp objects and
abrasive cleaning agents will
damage the appliance. Clean the
appliance and remove the
residues with water and dish soap
after each use. Remove also the
remnants of the cleaning agents.
Scratches or dark stains on the
glass ceramic that cannot be
removed do not affect the
functioning of the appliance.

Troubleshooting

Warning! Refer to Safety
chapters.
What to do if...
Problem
You cannot switch on the ap‐
pliance or operate it.
Removing the residues and stubborn
residues
Food containing sugar, plastics, or tin foil
residues should be removed at once. A
scraper is the best tool for cleaning the glass
surface. It is not supplied with the appliance.
Place a scraper on the hob surface at an
angle and remove residues by sliding the
blade over the surface. Clean the appliance
using a damp cloth and some dish soap.
Finally, wipe the glass surface dry with a
clean cloth.
Limescale rings, water rings, fat splashes, or
shiny metallic discolourations should be
removed after the appliance has cooled
down. Use only a specialised cleaner for
glass ceramic or stainless steel.
Possible cause
The hob is not connected to
an electrical supply or it is
connected incorrectly.
operating and disappears or weakens
when some of them are switched off. The
noises described are a normal element of
the described induction technology and
should not be regarded as defects.
Check if the hob is correctly
connected to the electrical
supply. Refer to the connec‐
tion diagram.
19
Remedy