Table of Contents
Advertisement
MAXPRO NVR 3.1 Commissioning and Installation Guide
Note:
NIC2 is not available on all NVR options, please refer to the data sheet for more
information.
If more than one MAXPRO NVR unit is on the same network, it is recommended that you
assign a unique IP address and computer name to each unit (the default name is
MAXPRO-NVR).
To change the IP address
1.
Click the network icon
Center, and then click Change adapter settings.
Figure 2-3
Network and Sharing Center
2.
Right-click Camera Network or Client Workstation Network, and then click Properties.
The Local Area Connection Properties dialog box similar to the following figure
appears.
Figure 2-4
LAN Properties
S E T T I N G U P T H E M A X P R O N V R
Settings for the MAXPRO NVR Single-box Turnkey Solution
in the notification area, click Open Network and Sharing
27
Advertisement
Table of Contents
