Choose Recording Drives - Honeywell MAXPRO NVR 3.1 Installation Manual

I N S T A L L I N G M A X P R O N V R
3
Full Installation
Figure 3-12
Note:
8.
Figure 3-13
9.
50
Choose Metadata Path
Metadata path can be changed from the default to a seperate Metadata partition
as recommended in the
Click Browse to select a new path, and click Next.

Choose Recording Drives

Select the required drive check box to save the camera recordings (to use as a video
storage drive).
Before you Begin section.
Figure 3-13
MAXPRO NVR 3.1 Commissioning and Installation Guide
appears.