Checking The Acknowledgement And Clearing Of Alarms - Honeywell MAXPRO NVR 3.1 Installation Manual

V E R I F Y I N G T H E C O N F I G U R A T I O N
5

Checking the Acknowledgement and Clearing of Alarms

Checking the Acknowledgement and
Clearing of Alarms
Clicking the Alarms tab next to the Device tab opens the Alarms window that lists all the
alarms in a floating window. You can acknowledge and clear the alarms.
Alarms notify the occurrence of events to the operators. You can configure alarms to be
triggered when events such as recorder disk space nearing full, motion detection, and others
happen. The events that trigger an alarm can be selected while configuring the recorders,
cameras, and switchers. The events can be associated to event groups.
Each alarm goes through the following states.
New or Unacknowledged
When an alarm is triggered it appears in the Alarm window. You can click the Alarm tab to view
the Alarm window. The state of the alarm after it is triggered is referred to as unacknowledged.
You can view the list of all the unacknowledged alarms in a table in the Alarm window.
Note:
72
Refer to the MAXPRO NVR Operator's Guide for more information on the Alarms.
MAXPRO NVR 3.1 Commissioning and Installation Guide