Table of Contents
Advertisement
[PRE REC]
Sets whether to perform pre-recording.
The pre-recording time differs depending on the setting of the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [MAIN PIXEL]/[MAIN CODEC].
[ON]
[OFF]
(Factory setting: [OFF])
@
NOTE
t For the combination that can be set and restriction, refer to "Recording function that cannot be used simultaneously".
[REC FUNCTION]
[REC MODE]
Selects the recording mode.
[NORMAL]
[INTERVAL]
(Factory setting: [NORMAL])
@
NOTE
t For the combination that can be set and restriction, refer to "Recording function that cannot be used simultaneously".
[INTERVAL TIME]
Sets the interval duration for interval recording.
The items that can be set are as follows.
f [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]
(Factory setting: [5min])
[TC]
[SET TC]
Sets the default value of the time code to record.
Hour
Minute
Second
Frame
(Factory setting: [00]) (each item)
[SET UB]
Sets user bits.
Enabled only when [USER] is selected in [UB MODE] of [TC].
Each digit can be set in following range.
f [00]...[FF]
(Factory setting: [00])
[TC/UB/Dur.]
Switches the time code display to the user bits or duration counter display.
The items that can be set are as follows.
[TC]
[UB]
[Dur.]
(Factory setting: [TC])
[FREE/REC RUN]
Sets the operation mode to advance the time code generator.
[FREE RUN]
[REC RUN]
(Factory setting: [FREE RUN])
Chapter 4 Operation — Menu setting contents
Performs the pre-recording.
The pre-recording time is as follows.
f When [MAIN PIXEL] is [1280x720], [1920x1080], or [2048x1080]: Approximately 10 seconds
f When [MAIN CODEC] is [422ALL-I 400M]: Approximately 3 seconds
f Other than above: Approximately 5 seconds
Does not perform the pre-recording.
Performs the standard recording.
Performs the interval recording. (A function to repeatedly perform the operation of one frame recording in set time interval.)
[00]...[23]
[00]...[59]
[00]...[59]
[00] ... [23] (when [24.00p] or [23.98p] is set)
[00] ... [24] (when [50.00i], [50.00p], or [25.00p] is set)
[00] ... [29] (when [59.94i], [59.94p], or [29.97p] is set)
Time code display
User bits display
Duration counter display
Advances regardless of the operation mode.
Advances only while recording.
– 88 –
Advertisement
Table of Contents
