Table of Contents
Advertisement
[FILE] menu
Saves and reads the setting data.
For saving and loading target, refer to "Target items for scene file/setup file/initialization".
For details of saving and loading, refer to "Handling setting data".
[SCENE FILE]
[LOAD]
[SAVE]
[SAVE AS]
[SETUP FILE]
[LOAD]
[SAVE]
[SAVE AS]
[NETWORK SETTINGS] menu
Sets the setting regarding the network function.
[NETWORK SEL]
Sets if the external equipment (PC, etc.) and the camera is to be connected to the network using the wireless LAN.
[WLAN]
[OFF]
(Factory setting: [OFF])
[NETWORK FUNC]
[USER ACCOUNT]
Sets the user account to be used for authentication in the network function of the camera.
[ADD]
[DELETE]
[NETWORK PROPERTY]
[MAC ADDRESS]
Displays the wireless LAN MAC address of the camera. (Cannot be changed)
[TYPE]
Sets the connection method to the wireless LAN.
[DIRECT]
[INFRA(SELECT)]
[INFRA(MANUAL)]
(Factory setting: [DIRECT])
[SSID]
Enters or displays the network name of the camera (SSID).
(Factory setting: [AU-EVA1])
[BAND]
Switches between two communication methods ([2.4GHz] or [5GHz]) when [NETWORK PROPERTY] → [TYPE] → [DIRECT] is selected.
The items that can be set are as follows.
f [2.4GHz], [5GHz]
(Factory setting: [2.4GHz])
[CHANNEL(2.4GHz)]
Sets the channel to be used when connected to the wireless LAN with following items set.
f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [TYPE] → [DIRECT]
f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [BAND] → [2.4GHz]
Chapter 4 Operation — Menu setting contents
Selects the scene file saved in the SD card and reads it into the camera.
Can select if all of the scene files ([SCENE1] to [SCENE5]) are read, or individually read.
The setting value of the current scene file ([SCENE1] to [SCENE5]) is overwritten to the file selected from the list of scene
files saved in the SD card.
The setting value of the current scene file ([SCENE1] to [SCENE5]) is saved to the SD card as a new scene file by entering
the file name.
Selects the setup file saved in the SD card and reads it into the camera.
Overwrites the file selected in the list of the setup files saved in the SD memory card with the current setting value of the
camera.
Saves the current setting value in the camera as a new setup file in the SD card by entering the file name.
Connects with wireless LAN.
Does not connect.
Newly registers the user account. It is set as follows when not registered.
User account name: "guest", password: "auguest"
Deletes the registered user account. This will not operate when not registered.
It can connect directly without using a wireless access point to a device equipped with wireless LAN such as a tablet
terminal.
Connects to the wireless access point. The access point is selected from the list.
Connects to the wireless access point. Wireless access point is entered manually.
– 102 –
Advertisement
Table of Contents
