Table of Contents
Advertisement
The items that can be set are as follows.
f [AUTO], [CH1], [CH6], [CH11]
(Factory setting: [AUTO])
[CHANNEL(5GHz)]
Sets the channel to be used when connected to the wireless LAN with following items set.
f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [TYPE] → [DIRECT]
f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [BAND] → [5GHz]
The items that can be set are as follows.
f [AUTO], [CH36], [CH40], [CH44], [CH48], [CH100], [CH104], [CH108], [CH112], [CH116], [CH132], [CH136], [CH140], [CH149], [CH153], [CH157],
[CH161], [CH165]
(Factory setting: [AUTO])
NOTE
@
t Some items may not be able to select depending on the used wireless module.
[ENCRYPTION]
Sets the encryption method when [NETWORK PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)] is selected.
The items that can be set are as follows.
f [WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]
(Factory setting: [WPA2-AES])
[ENCRYPT KEY]
Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64 digits.
(Factory setting: [01234567890123456789abcdef])
[DHCP]
Sets if the automatic acquisition by DHCP is used or to use the DHCP function of the camera.
[OFF]
[CLIENT]
[SERVER]
(Factory setting: [SERVER])
[IP ADDRESS]
Set the IP address when [NETWORK PROPERTY] → [DHCP] → [OFF] or [SERVER] is selected.
(Factory setting: [192.168.0.1])
[SUBNET MASK]
Set the subnet mask when [NETWORK PROPERTY] → [DHCP] → [OFF] or [SERVER] is selected.
(Factory setting: [255.255.255.0])
[DEFAULT GATEWAY]
Set the default gateway when [NETWORK PROPERTY] → [DHCP] → [OFF] or [SERVER] is selected.
(Factory setting: [192.168.0.254])
@
NOTE
t If you do not use default gateway, set to [0.0.0.0].
t Default gateway setting is invalid when [NETWORK PROPERTY] → [TYPE] → [DIRECT] is selected.
[PRIMARY DNS]
Sets the primary DNS server in [NETWORK PROPERTY] when [INFRA(SELECT)] or [INFRA(MANUAL)] in [TYPE] is selected and [OFF] is selected for
[DHCP].
(Factory setting: [0.0.0.0])
@
NOTE
t When [NETWORK PROPERTY] → [TYPE] → [DIRECT] is selected, settings in primary DNS server is invalid.
[SECONDARY DNS]
Sets the secondary DNS server in [NETWORK PROPERTY] when [INFRA(SELECT)] or [INFRA(MANUAL)] in [TYPE] is selected and [OFF] is selected
for [DHCP].
(Factory setting: [0.0.0.0])
@
NOTE
t When [NETWORK PROPERTY] → [TYPE] → [DIRECT] is selected, the setting in primary DNS server is invalid.
Chapter 4 Operation — Menu setting contents
DHCP is not used.
Acquired from DHCP when connecting by setting [TYPE] in [NETWORK PROPERTY] is set to [INFRA(SELECT)] or
[INFRA(MANUAL)].
Enables the DHCP server function of the camera when connecting with [TYPE] in [NETWORK PROPERTY] is set to
[DIRECT].
– 103 –
Advertisement
Table of Contents
