Table of Contents
Advertisement
Description
Front Panel Controls
DVD-P360H
1
2
DVD-P365H
1
2
1.
STANDBY/ON (
)
When STANDBY/ON is pressed on, the indicator goes
out and the player is turned on.
2.
STANDBY indicator
When the unit is first plugged in, this indicator lights.
3.
DISC TRAY
Place the disc here.
4.
OPEN/CLOSE (
)
Press to open and close the disc tray.
5.
DISPLAY
Operation indicators are displayed here.
Front Panel Display
Total playing time/Displays various messages concerning operations such as PLAY,
STOP, LOAD ...
nodSC: No disc loaded.
OPEn: The disc tray is open.
LOAd: Player is loading disc information.
6
6
4
6
7
8
3
5
4
6
7
8
3
5
6
SKIP (
/
) SEARCH
Allow you to search forward/backward through
a disc. Use to skip the title, chapter or track.
7.
STOP (
)
Stops disc play.
8.
PLAY/PAUSE (
)
Begin or pause disc play.
Rear Panel
SUBWOOFER
CENTER
6
1
1.5.1CH ANALOG AUDIO OUT JACKS
- Connect to an amplifier with 5.1ch analog input jakcs.
2.DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect to
a compatible Dolby Digital receiver.
- Use to connect to an A/V Amplifier that contains a
Dolby Digital, MPEG2 or DTS decoder.
3. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P
video.
- If P-SCANVideo Output is selected in
Setup Menu, progressive scan mode will work.
- If I-SCAN Video Output is selected in Setup Menu,
interlaced scan mode will work.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in
the TV's menu system.
- If Component (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video will not work.
- See pages 27 ~ 28 to get more information on how to use the setup menu.
4. AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver.
5. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on
your television.
- The Video Output in Setup Menu must be set to
I-SCAN or S-Video.
6. S-VIDEO OUT JACK
, P
and Y
- Use the S-Video cable to connect this jack to the
R
B
S-Video jack on your television for higher picture
quality.
- The Video Output in Setup Menu must be set to
S-Video.
2
3
2
4
5 6
7
Advertisement
Table of Contents
