Tour Of The Remote Control; Choosing A Connection - Samsung DVD-P365H User Manual

Tour of the Remote Control

1 14
15
2
16
3
4
5
17
6
7 18
8 19
9
10 20
21
11
12 22
A-B
13 23
1. DVD POWER Button
Turns the power on or off.
2. NUMBER Buttons
3. VIDEO SEL. Button
Selects video output formats
4. SEARCH Buttos ( )
/
Allow you to search forward/backward through a disc.
8
5. INSTANT REPLAY Button
This function is used to replay the previous 10 seconds
of a movie from the current position.
6. SKIP Buttons ( )
/
Use to skip the title, chapter or track.
7. STOP Button ( )
8. MENU Button
Brings up the DVD player's menu.
9. ENTER/ Buttons
/ , /
This button functions as a toggle switch.
10. EZ VIEW Button
The aspect ratio of a picture can easily be adjusted
according
to the screen size of your TV (16:9 or 4:3).
11. DISC MENU Button
Brings up the Disc menu.
12. SUBTITLE Button
13. AUDIO Button
Use this button to access various audio functions on a
disc.
14. ZOOM Button
Enlarge DVD Picture
15. OPEN/CLOSE ( ) Button
To open and close the disc tray.
16. STEP Button
Advances play one frame at a time.
17. INSTANT SKIP Button
This function skips playback ahead 10 seconds.
18. PLAY/PAUSE Button ( )
Begin/Pause disc play.
19. RETURN Button
Returns to a previous menu.
20. INFO Button
Displays the current disc mode.
21. CANCEL Button
Use to remove menus or status displays from the
screen.
22. REPEAT A-B Button
Allows you to repeat play A-B disc.
23. REPEAT Button
Allows you to repeat play a title, chapter, track, or disc.
CONNECTIONS CONNECTIONS

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and
other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
- Refer to the user's manual of the additional components you are connecting for more information on those
particular components.
Connection to a TV (For Video)
1
Using video/audio cables, connect the VIDEO
(yellow)/AUDIO (red and white) OUT terminals on the rear
of the DVD player to the VIDEO (yellow)/AUDIO (red and
white) IN terminals of TV.
2
Turn on the DVD player and TV.
3
Press the TV/VIDEO button on the TV's remote control to
select Video.
Note
- Noise may be generated if the audio cable is too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 13 to 14)
- The number and position of terminals can vary depending on your TV set. Please refer to the user's man-
ual of the TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the
DVD player.
9