Set Your Remote Access Code; Call Screening; Call Intercept; Record, Play Or Delete Memos - VTech CS6224-11 User Manual

Set your remote access code

You can set your own remote access code
from 00 to 99.
1. Press MENU when the phone is not in
use.
2. Press q or p to choose Answering
sys and then press SELECT.
3. Press q or p to choose Ans sys
setup and then press SELECT.
4. Press q or p to choose Remote
code and then press SELECT.
5. Press the dialing keys (0-9) to enter the
code, or q or p to select from 00 to
99, then press SELECT to save. You
hear a confirmation tone.

Call screening

If the answering system and call screening
are on, the announcement and the
incoming message broadcast at the
telephone base while the call is answered
by the answering system.
Options while a message is being
recorded:
• Press /VOLUME or /VOLUME to
adjust the listening volume.
/STOP to temporarily turn off
• Press
the call screening.
/PLAY or /VOLUME to
• Press
temporarily turn on the call screening if
it is set to off.

Call intercept

If you want to talk to the person whose
message is being recorded, press
the handset.

Record, play or delete memos

Memos are your own recorded messages
used as reminders for yourself or others
using the same answering system. You can
record your own memos using a system
handset. Playback and delete them in the
same way as incoming messages.
1. Press MENU when the phone is not in
use.
2. Press q or p to choose Answering
sys and then press SELECT.
3. Press q or p to choose Record
memo and then press SELECT.
The handset displays Record
in 5 sec (counting down) and
then Recording... Stop [5] and
announces, "Record after the tone.
Press 5 when you are done."
4. Speak towards the handset
microphone. Press 5 or OFF when
you finish recording. The handset
announces "Recorded."
NOTES
• If you record a memo when the answering
system memory is full, the system
announces, "Memory is full."
• Each memo can be up to three minutes in
length. Memos shorter than two second are
not recorded.
• When the answering system has less than
three minutes of recording time left, the
handset announces, "Less than three
minutes to record," and displays Rec mem
low.
on
23