Technical Description - Dometic 8 Series Operating Manual

RM(x)8xx6
6

Technical description

6.1 Description
The refrigerator is an absorption refrigerator. The refrigerator is designed to operate
with different types of energy and can be powered by AC, DC or liquefied gas
(propane or butane). For DC operation, the vehicle battery can be used. The thermo-
static control ensures that the refrigerator temperature is kept constant and as little
power as possible is consumed.
The refrigerator has a locking mechanism to protect it during transport.
The refrigerator has a defrost water drain. The drain opening is located on the rear
panel of the refrigerator.
The refrigerator is equipped with an automatic flame monitoring which automatically
interrupts the gas supply after approx. 30 seconds if the flame goes out.
The refrigerator has an automatic operating mode that automatically selects the most
economical connected type of energy.
The refrigerator has a refueling mode. After switching off the engine, for example
during refueling, gas operation is blocked for 15 minutes (refueling delay). This
avoids automatic switching to gas operation during refueling.
The refrigerator is equipped with a CI bus interface and can optionally be connected
to a compatible, central control panel (if available).
6.2 Components
No. in
fig. 1, page 2
1
2
3
4
5
6
7
8
EN
Description
Upper tray with hatch
Bottom tray with bottle holder
Vegetable compartment
Type plate
Thawed water drainage channel
Evaporator for cold storage
Ice compartment
Control panel
Technical description
23