Table of Contents
Advertisement
BASIC OPERATIONS
Configuring Display Settings
In the OSD menu, select
‡
Select Aspect Ratio and select one of the available options: 16:9, 4:3, or PTP (Pixel To Pixel).
Note:
For 4K input, the aspect ratio will be locked to PTP. For non-4K input, PTP will be grayed out and user
can select only 4:3 or 16:9 as aspect ratio.
‡
Select Pixel Shift (min) and select one of the available options: Off, 2, 3, 5, 30, or 60.
Note:
‡
Pixel shift feature helps to prevent image retention.
‡
Pixel shift is supported with all input sources except for Android.
‡
Select the Backlight slider bar and press the t or u button to adjust the backlight level.
Note:
Backlight can be adjusted also in the Shortcut menu. Refer to page 36.
‡
Select the Low Blue Light slider bar and press the t or u button to adjust the blue light level.
Note:
Low Blue Light can be adjusted also in the Shortcut menu. Refer to page 36.
‡
Select Dynamic Black and select one of the available options: Off or Based on Content (not supported in
Android).
Note:
Dynamic black feature gives more depth to your image so that bright scenes appear crisp and clear, while
dark scenes remain detailed with deep blacks and exceptional light and shade detail.
to open the Display menu, then complete the following steps:
41
English
Advertisement
Table of Contents
