SETUP AND INSTALLATION
Remote Control Operating Range
When using the remote control, make sure to point it within ±30° to the IR receiver on the panel. The distance
between the remote control and the IR sensor window should not be longer than 8 meters.
Make sure that there are no obstacles between the remote control and the IR sensor window on the
panel that might obstruct the infra-red beam.
Make sure the IR transmitter of the remote control is not being obstructed by direct sunlight or
fluorescent lamps.
If the remote control is near Inverter-Type fluorescent lamps, you may experience intermittent
functionality.
If the remote control and the display are too close together, the remote control might not function
properly.
23
English