USING THE DISPLAY
Powering On/Off
Powering on
Note:
After the power cord is properly connected, make sure the Power switch is set to ON (I).
Press the Power button to turn the panel on. The LED indicator light turns blue, indicating it is ready to use.
Note:
You can also press the
Powering off
Press the Power button for 3 seconds to turn off the panel. Press OK at the prompt to turn it off immediately or wait
for 10 seconds until the panel turns off automatically.
When the LED indicator light turns red, this indicates that the panel has entered standby mode.
Note:
You can also press the
The panel still consumes power when it is in standby mode. It is highly recommended to unplug the
power cord from the power outlet if the panel will not be used for an extended period of time.
30
English
button on the remote control to turn on the panel.
button on the remote control to turn off the panel.