SMA SB 3000TL-US-22 Installation Manual page 25

SMA America, LLC
Small-scale PV system with Speedwire/Webconnect data module cannot be
combined with other PV systems
If you already have a PV system set up in Sunny Portal with a different communication device,
e.g. Sunny WebBox, you will still need to create a separate small-scale PV system with
Speedwire/Webconnect data module. It is not possible to combine the Speedwire/
Webconnect data module and other communication devices in one system in Sunny Portal.
Sunny Portal treats the existing PV system and the new small-scale PV system with Speedwire/
Webconnect data module as independent PV systems.
• Create a new small-scale PV system with Speedwire/Webconnect data module.
Replacement of the Speedwire/Webconnect data module in the inverter
If you have replaced the Speedwire/Webconnect data module in the inverter with a new
Speedwire/Webconnect data module, the PIC and the RID of the inverter will be changed.
Therefore, you will also need to replace the inverter in Sunny Portal using the Plant Setup
Assistant (see the Sunny Portal user manual). In the Plant Setup Assistant, you must enter the PIC
and the RID of the new Speedwire/Webconnect data module.
Starting the Plant Setup Assistant in Sunny Portal
The Plant Setup Assistant is a step-by-step guide to the procedure required for user registration and
the registration of your PV system in Sunny Portal
Procedure:
1. Go to www.SunnyPortal.com.
2. Select [Plant Setup Assistant].
☑ The Plant Setup Assistant opens.
3. Follow the instructions of the Plant Setup Assistant.
Installation Manual SWWEBCONDM-IA-US_en-14
6 Commissioning
25