5 Connection
4. Push the pre-mounted filler plug out of the second
hole from the left in the inverter enclosure and retain
it for future decommissioning.
5. Attach the cable gland to the enclosure opening
using the counter nut.
6. Insert the Speedwire/Webconnect data module
and push the ribbon cable upwards behind the
display. The key on the top edge of the Speedwire/
Webconnect data module must fit into the hole in
the plastic retainer in the inverter.
7. Fasten the Speedwire/Webconnect data module
hand-tight with a torque of 13 in-lb (1.5 Nm) using
the hexagon socket screw (AF 3).
8. Flip the display down.
18
SWWEBCONDM-IA-US_en-14
SMA America, LLC
2
1
Installation Manual