SMA SB 3000TL-US-22 Installation Manual page 20

Speedwire/webconnect data module

Hide thumbs Also See for SB 3000TL-US-22:

Table of Contents

5 Connection

3. Push the pre-mounted filler plug out of the second

hole from the left in the inverter enclosure.

4. If a conduit is to be used, proceed as follows:

• Insert one rain-tight or wet-strength conduit fitting into the enclosure opening and fasten from

the inside using a counter nut.

• Install one conduit at the enclosure opening.

• Lead one or two cables through the conduit into the inverter.

• Insert the network cables into the network ports. This can be done in any order.

5. If no conduit is to be used, proceed as follows:

• Attach cable gland to the enclosure opening

using the counter nut.

• Unscrew the swivel nut of the cable gland on

the inverter.

• Press the seal out of the cable gland from the

inside.

SWWEBCONDM-IA-US_en-14

SMA America, LLC

Installation Manual

Table of Contents