Wi-Fi; Basic Settings; 2.4Ghz Band - D-Link DIR-806A User Manual

DIR-806A Wireless AC750 Multi-Function Router
User Manual

Wi-Fi

In this menu you can specify all needed settings for your wireless network.

Basic Settings

On the Wi-Fi / Basic settings page, you can enable your wireless local area network (WLAN)
and configure its basic parameters. To configure the 2.4GHz band or 5GHz band, proceed to the
relevant tab.

2.4GHz Band

Figure 142. Basic settings of the wireless LAN in the 2.4GHz band.
Parameter
Enable Wireless
BSSID
Hide Access Point
The checkbox enables Wi-Fi connections in the 2.4GHz. If you want
to disable your WLAN in this band, deselect the checkbox.
The unique identifier for your Wi-Fi network (for the 2.4GHz and
5GHz band). You cannot change the value of this parameter, it is
determined in the device's internal settings.
If the checkbox is selected, other users cannot see your Wi-Fi
network. (It is recommended not to select this checkbox in order to
simplify initial configuration of your WLAN.)
Page 193 of 233
Configuring Device (Access Point Mode)
Description