D-Link DIR-806A User Manual page 113

DIR-806A Wireless AC750 Multi-Function Router
User Manual
Parameter
Connect automatically
Username
Without authorization
Password
Password confirmation
VPN server address
Encryption
Authentication
algorithm
MTU
Keep Alive
Extra options
Dial on demand
VPN
Select the checkbox to enable auto-start of the connection upon the
boot-up of the router.
A username (login) to access the Internet.
Select the checkbox if you don't need to enter a username and
password to access the Internet.
A password to access the Internet.
The confirmation of the entered password (to avoid mistypes).
The IP or URL address of the PPTP or L2TP authentication server.
Select a method of MPPE encryption.
No encrypt: MPPE encryption is not applied.
•
MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit
•
key is applied.
MPPE 40 bit: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit: MPPE encryption with a 128-bit key is
•
applied.
MPPE encryption can be applied only if the MS-CHAP, MS-
CHAP-V2, or AUTO value is selected from the Authentication
algorithm drop-down list.
Select a required authentication method from the drop-down list or
leave the AUTO value.
The maximum size of units transmitted by the interface.
Select the checkbox if you want the router to
your ISP even when the connection has been inactive for a specified
period of time. When the checkbox is selected, the LCP interval
and LCP fails fields are available. Specify the required values.
Advanced options of the pppd daemon which need to be specified
for this connection. Optional.
Select the checkbox if you want the router to establish connection to
the Internet on demand. In the Maximum idle time field, specify a
period of inactivity (in seconds) after which the connection should
be terminated.
Page 113 of 233
Configuring Device (Router Mode)
Description
keep you connected to