Lan - D-Link DIR-806A User Manual

DIR-806A Wireless AC750 Multi-Function Router
User Manual

LAN

To configure the router's local interface, proceed to the Net / LAN page.
If needed, edit the basic settings of the local interface.
Parameter
IP Address
Netmask
When needed settings are configured, click the Apply button.
In the DHCP server section, you can configure the built-in DHCP server of the router. In the
router mode, the DHCP server is enabled by default.
Figure 85. Basic settings of the local interface.
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
Figure 86. The section for configuring the DHCP server.
Page 115 of 233
Configuring Device (Router Mode)
Description