D-Link DIR-806A User Manual page 94

DIR-806A AC750 Wi-Fi Router
User Manual
Parameter
Hostname
Figure 79. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Parameter
Mode of dynamic IP
address assignment
Start IP
End IP
The name of the device assigned to its IPv4 address in the local
subnet.
Dynamic IP Addresses
An operating mode of the router's DHCP server.
Disable: The router's DHCP server is disabled, clients' IP
•
addresses are assigned manually.
DHCP server: The router assigns IP addresses to clients
•
automatically in accordance with the specified parameters.
When this value is selected, the Start IP, End IP, Lease
time fields and the DNS relay switch are displayed on the
tab. Also when this value is selected, the DHCP Options
and Static IP Addresses sections are displayed on the tab.
DHCP relay: An external DHCP server is used to assign IP
•
addresses to clients. When this value is selected, the
External DHCP server IP and Option 82 Remote ID
fields are displayed on the tab. Available if the Router or
WISP Repeater
Configuration Wizard.
The start IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The end IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
Page 94 of 197
Configuring via Web-based Interface
Description
Description
mode was selected the Initial