D-Link DIR-806A User Manual page 165

DIR-806A AC750 Wi-Fi Router
User Manual
Parameter
Protocol
NAT Loopback
Remote IP
Public port (start) /
Public port (end)
Private IP
Private port (start) /
Private port (end)
Click the APPLY button.
To edit the parameters of an existing server, select the relevant line in the table. On the opened page,
change the needed parameters and click the APPLY button.
To remove a server, select the checkbox located to the left of the relevant line of the table and click
the DELETE button (
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
Move the switch to the right in order to let the users of the router's
LAN access the local server using the external IP address of the
router or its DDNS name (if a DDNS service is configured). Users
from the external network access the router using the same address
(or DDNS name).
Public Network Settings
Enter the IP address of the server from the external network.
To add one more IP address, click the ADD REMOTE IP button and
enter the address in the displayed line.
To remove the IP address, click the Delete icon ( ) in the line of
the address.
A port of the router from which traffic is directed to the IP address
specified in the Private IP field in the Private Network Settings
section. Specify the start and the end value for the port range. If you
need to specify one port, enter the needed value in the Public port
(start) field and leave the Public port (end) field blank.
Private Network Settings
The IP address of the server from the local area network. To choose
a device connected to the router's LAN at the moment, select the
relevant value from the drop-down list (the field will be filled in
automatically).
A port of the IP address specified in the Private IP field to which
traffic is directed from the Public port. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the Private port (start) field and leave the
Private port (end) field blank.
). Also you can remove a server on the editing page.
Page 165 of 197
Configuring via Web-based Interface
Description