D-Link DIR-806A User Manual page 174

DIR-806A AC750 Wi-Fi Router
User Manual
To change the web-based interface language, select the needed value from the Language drop-
down list.
The following buttons are also available on the page:
Control
Factory
Backup
Restore
Save
Reboot
In the Idle time field specify a period of inactivity (in minutes) after which the router completes
the session of the interface. By default, the value 5 is specified. Then click the SAVE button.
To configure automatic reboot of the device on a schedule, in the Automatic Reboot section,
move the Enable switch to the right and specify the time period for the device's reboot (in seconds)
in the Period field. Click the SAVE button.
To disable automatic reboot of the device on a schedule, in the Automatic Reboot section, move
the Enable switch to the left and click the SAVE button.
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware WPS/RESET button
(see the Back Panel section, page 13).
Click the button to save the configuration (all settings of the router)
to your PC. The configuration backup will be stored in the
download location of your web browser.
Click the button and follow the dialog box appeared to select a
previously saved configuration file (all settings of the router)
located on your PC and upload it.
Click the button to save settings to the non-volatile memory.
The router saves changed settings automatically. If changed settings
have not been saved automatically, a notification is displayed in the
top right part of the page.
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
Page 174 of 197
Configuring via Web-based Interface
Description