D-Link DIR-806A User Manual page 73

DIR-806A AC750 Wi-Fi Router
User Manual
Figure 64. The page for creating a new Static IPv4 connection. The IPv4 section.
Parameter
IP address
Subnet mask
Gateway IP address
Primary DNS /
Secondary DNS
Obtain DNS server
addresses
automatically
Primary DNS /
Secondary DNS
Vendor ID
Hostname
IPv4
For Static IPv4 type
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
For Dynamic IPv4 type
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS and
Secondary DNS fields are not available for editing.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
The identifier of your ISP. Optional.
A name of the router specified by your ISP. Optional.
Page 73 of 197
Configuring via Web-based Interface
Description