Table of Contents
Advertisement
5. See the upper drawing. To avoid pinching or
5
damaging the Pulse Wires (28) while you
assemble the Handlebar (39), perform the fol-
lowing actions:
Insert the end of the left Pulse Wire (28) inside
the left side of the Handlebar (39).
39
Then, insert the end of the right Pulse Wire (28)
inside the right side of the Handlebar (39).
See the lower drawing. Have a second person
hold the Handlebar (39) in place around the
Upright (2).
28
Tip: Avoid pinching the wires. Attach the
28
Handlebar (39) to the Upright (2) with three M10
x 20mm Patch Screws (79).
79
79
2
39
Avoid pinching
the wires
8
Advertisement
Table of Contents
