Lenovo 30A0 Hardware Maintenance Manual page 164

8. Install the screw to secure the card reader bracket to the chassis.
Figure 104. Installing the screw that secures the card reader
9. Connect the card reader cable to Front USB connectors on the system board. See "Locating parts on
the system board" on page 82.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 216.
Replacing the card reader
To replace the card reader, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 150.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 151.
4. Locate the card reader drive bay. See "Locating internal drives" on page 84.
158
ThinkStation E32 Hardware Maintenance Manual