Replacing the internal speaker
Attention:
Do not open your computer or attempt any repair before reading and understanding "Important safety information"
on page 1.
This section provides instructions on how to replace the internal speaker.
Note: The internal speaker is only available in some models.
To replace the internal speaker, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 86.
3. Locate the internal speaker connector on the system board. See "Locating parts on the system board"
on page 74.
4. Disconnect the internal speaker cable from the system board.
5. Push the metal tab
right to completely remove it from the chassis.
Figure 49. Removing the old internal speaker
114
ThinkStation E32 Hardware Maintenance Manual
1
on the right side of the internal speaker and slide the internal speaker toward the