Advertisement
7. Level 2 Repair
5
Remove the PBA and C to C FPCB and Batt Conn
and COAXIAL CABLE And VT Camera, Macro
Camera, Vokeh CAM
※ Caution
Be care of several kinds of damage at PBA and FPCB.
7
Detach RCV from Front Ass'y.
※ Caution
Be careful not to damage the RCV.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
6
Remove WIDE CAM, Ultra wide CAM
connectors.
※ Caution
Be careful not to damage the Camera Module.
8
Detach Motor from Front Ass'y.
※ Caution
Be careful not to damage the Motor.
Advertisement
