Advertisement
8. Level 3 Repair
8-4-17. Quad Camera
"Camera" function does not work
Check the Camera connector
Check the voltage
C8013 : 1.8V, C8009 : 1.1V
C8010 : 2.9V, C8011 : 1.8V
C8014 : 2.8V, C8023 : 2.8V,
C8024 : 1.05V, C8020 : 2.8V,
Check the CAM_MCLK is
26MHz (C8002, C8016, C8019, C8026)
Replace the camera module
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
Yes
on Main PBA
Yes
C8021 : 1.2V
Yes
Yes
Yes
END
No
SOC8001, SOC8002, SOC8003, SOC8004
No
U8001, U8003, U8005, U8006
No
Reconnect
Resolder or Replace
Replace the PBA
Advertisement
